Friday 29 August 2014
PTU Autumn
This tutorial was written by me on August 29, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X2 but any version would work.
Artist: Alex Prihodko
I bought this tube at Pics For Design HERE
Do not use this tube
unless you have a license.
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 6. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 6. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
NEW RASTER LAYER - C/Paste into selection Paper 1. Keep selected.
Now grab the tube you are using. If you are using the same one as me, mirror and grab it now. C/P and re-size 85%. Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer. Move copy under original tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on OVERLAY.
(see tag for placement)
Now onto some elements:
Element 14 - C/P and move it to the top left side of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 28 - C/P and re-size 85%. Move bottom right side of tag. Make sure this layer is also UNDER the frame layer(s).
Element 126 - C/P and move to lower right side of tag. Make sure this layer, and all other layer(s), are OVER the frame layer(s).
Element 132 - C/P and re-size 80%. Move to bottom middle of tag.
(see tag for placement)
If you are using the same tube as me. C/P and re-size 40%. Move to bottom middle of tag over element 132.
(see tag for placement)
Element 59 - C/P and re-size 30%. Move to bottom left corner of tag.
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday 17 August 2014
PTU Magic
This tutorial was written by me on August 17, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X2 but any version would work.
Artist: Misticheskaya
I bought this tube at Pics For Design HERE
Do not use this tube
unless you have a license.
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 4. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 4. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
NEW RASTER LAYER - C/Paste into selection Paper 1. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab it now. C/P and re-size 95%. Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer. Move copy under original tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Now onto some elements:
Element 34 - C/P and move it to the top of tag, then move it just a little bit to the left. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror then flip.
(see tag for placement)
Element 26 - C/P and re-size 75%. Move to upper middle of tag, but a bit to the right. Make sure this layer is also UNDER the frame layer(s). Duplicate and mirror.
Element 12 - C/P and re-size 60%. Make sure this layer, and all other layer(s), are OVER the frame layer(s). Move to bottom middle of frame.
Element 16 - C/P and re-size 75%. Move to left side of frame.
(see tag for placement)
Element 20 - C/P and re-size 40%. Move to top left corner of frame.
If you are using the same tube as me. C/P and re-size 80% and then mirror. Move to bottom right corner of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Friday 15 August 2014
PTU Violet
This tutorial was written by me on August 15, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X2 but any version would work.
Artist: Sara Butcher
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapBCS_IB-SaraButcher-35-3
You can find this kit by Baby Cakes Scraps at Creative Design Outlet HERE
You can find this kit by Baby Cakes Scraps at Creative Design Outlet HERE
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 4. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 4. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
NEW RASTER LAYER - C/Paste into selection Paper 2. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab it now. I used the tube without the branch here. Mirror and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Now onto some elements:
Element 42 - C/P and move it to the bottom of tag, then move it just a little bit to the right. Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 13 - C/P and Move to right side of tag. Make sure this layer is also UNDER the frame layer(s). Duplicate and mirror. Move copy up just a little.
Element 19 - C/P and mirror. Move to lower right side of frame. Make sure this and ever other layer is OVER the frame layers.
Element 1 - C/P and re-size 60%. Move to right side of tag over element 19.
Element 41 - C/P and move to top middle of tag. I did a quick drop shadow here. I use the same as usual except I changed the color to white.
(see tag for placement)
Element 15 - C/P and re-size 80%. Move to upper left side of tag.
I place the tube layer(s) here:
If you are using the same tube as me. C/P and move to the bottom left side of tag and move this layer under the element 15 layer.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Wednesday 13 August 2014
PTU Gothic Princess
This tutorial was written by me on August 13, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X2 but any version would work.
Artist: Enamorte
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 1. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 1. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
NEW RASTER LAYER - C/Paste into selection Paper 2. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab it now. I used the CU here. Mirror and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Now onto some elements:
Element 28 - C/P and leave it where it lands on tag. Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 1 - C/P and re-size 30%. Move to top left corner of tag. Make sure this layer is also UNDER the frame layer(s).
Element 20 - C/P and re-size 60%. Move to top left corner over element 1. Make sure this layer is also UNDER the frame layer(s).
Element 18 - C/P and re-size 75%. Move to left side behind frame.
Make sure this layer is also UNDER the frame layer(s).
Element 26 - C/P and re-size 80%. Move to left side of tag, almost beside element 1. Make sure this and ever other layer is OVER the frame layers. Duplicate and mirror.
(see tag for placement)
Element 14 - C/P and move to upper right side of tag.
Element 22 - C/P and re-size 50%. Move to bottom right side of frame. Duplicate and mirror.
I place the tube layer(s) here:
If you are using the same tube as me. C/P and move to the bottom right side of tag in front of everything.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Saturday 9 August 2014
This tutorial was written by me on August 9, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version will do.
Artist: Lia's Gallery
You can find her art here HERE
Here goes:
Element 5 - C/P and move to upper right side of tag over mask layers.
(see tag for placement)
Element 2 - C/P and leave it where it lands on tag.
(see tag for placement)
Element 105 - C/P and re-size 70%. Move to bottom left side of tag. Have it so it looks like it's sitting on the edge of bridge.
(see tag for placement)
Element 109 - C/P and re-size 40%. Move to bottom left corner of element 2.
(see tag for placement)
Element 67 - C/P and mirror. Move to the upper left side of tag.
(see tag for placement)
Element 57 - C/P and re-size 70%. Move to very top left corner of tag.
(see tag for placement)
Element .gif - C/P and and re-size 70%. Move to top right side of tag.
(see tag for placement)
Element 124 - C/P and move to upper right corner of tag.
(see tag for placement)
Element 22 - C/P and re-size 20%. Move to bottom left corner of element 2.
(see tag for placement)
Element 15 - C/P and re-size 40%. Move to bottom right corner of element 2.
(see tag for placement)
Element 12 - C/P and re-size 30%. Mirror and move to bottom left side of element 2.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and move her to the bottom of the tag so that she seems to be standing on the bridge.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
(see tag for placement)
Element 2 - C/P and leave it where it lands on tag.
(see tag for placement)
Element 105 - C/P and re-size 70%. Move to bottom left side of tag. Have it so it looks like it's sitting on the edge of bridge.
(see tag for placement)
Element 109 - C/P and re-size 40%. Move to bottom left corner of element 2.
(see tag for placement)
Element 67 - C/P and mirror. Move to the upper left side of tag.
(see tag for placement)
Element 57 - C/P and re-size 70%. Move to very top left corner of tag.
(see tag for placement)
Element .gif - C/P and and re-size 70%. Move to top right side of tag.
(see tag for placement)
Element 124 - C/P and move to upper right corner of tag.
(see tag for placement)
Element 22 - C/P and re-size 20%. Move to bottom left corner of element 2.
(see tag for placement)
Element 15 - C/P and re-size 40%. Move to bottom right corner of element 2.
(see tag for placement)
Element 12 - C/P and re-size 30%. Mirror and move to bottom left side of element 2.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and move her to the bottom of the tag so that she seems to be standing on the bridge.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Save and add
name and © info.
Let me know what you think of
this tutorial.
I would love to see any results.
Thursday 7 August 2014
PTU Sorbet Dreams
This tutorial was written by me on August 7, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X2 but any version would work.
Artist: Sweet Pin Up
This was a free tube from Sweet Pinup HERE
Do not use this tube
unless you have a license.
Scrap Kit: Sorbet Dreams by Scrappin With Lil Ole Me
You can find this kit at Dzines From The Heart HERE
You can find this kit at Dzines From The Heart HERE
Mask: WSL 84
HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 14. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 14 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 14. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 14 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
NEW RASTER LAYER - C/Paste into selection Paper 2. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab it now. I used the the smaller version in color here. Move her into position.
I also put some elements along with the tube over the paper layer.
(see tag for placement)
Now onto some elements:
Element 119 - C/P and move to middle left side of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 86 - C/P and move to bottom left corner of tag. Make sure this layer is also UNDER the frame layer(s). Duplicate and mirror then flip.
(see tag for placement)
Element 78 - C/P and re-size 50%. Move to bottom left side of frame. Make sure this and all the rest of the layers are OVER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 77 - C/P and move to bottom left corner of frame in front of element 78. Duplicate and mirror.
Element 95 - C/P and move to the middle of frame.
(see tag for placement)
Element 91 - C/P and move to lower left corner of frame.
Element 53 - C/P and re-size 40%. Move to top right corner of frame. Free Rotate 20º left and then duplicate. Move copy to far left corner of frame.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me. C/P and and re-size 70%. Move to the bottom of tag but a bit to the left on tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)